Class 8.8 Metric Hex Cap Screw M8-1.25 X 60mm Zinc Plated

Hillman Class 8.8 Metric Hex Cap Screw M8-1.25 x 60mm Zinc Plated

The Hillman Class 8.8 Metric Hex Cap Screw is a strong, dependable bolt for general-purpose fastening. It has a hexagonal head and machine threads, and it can be used with a nut or in a tapped hole. A washer face under the head gives a better seal against the work surface. The coarse thread runs partially along the shank, which gives a stronger grip between the joined parts and less shear movement. The heat-treated zinc finish combines lasting durability with corrosion protection. The hex cap head and machine threads allow higher-torque tightening with a wrench or drill. For best results, match it with Class 8.8 washers and nuts. This screw has an M8-1.25 coarse metric thread and a length of 60mm.

Features & Details

• Class 8.8 steel, suitable for most general use (match with Class 8.8 washers and nuts)
• Thread size: M8-1.25 metric coarse thread
• Length: 60mm
• Partially threaded shank for a stronger grip and less shear movement
• Washer face under the head for a better seal
• Heat-treated zinc finish for durability and corrosion protection
• Hex cap head with machine threads for higher torque capability
• For use with a nut or in a tapped hole
• Tighten with a wrench or a drill
• Pre-drilling recommended: drill a hole matching the diameter of the bolt