Intex Zx300 Deluxe Automatic Pool Cleaner — Pressure-side, Floor & Wall Cleaner

Intex ZX300 Deluxe Automatic Pool Cleaner — Pressure-Side, Floor & Wall Cleaner (Model 28005)

Let the pool clean itself. The Intex ZX300 is a water-powered automatic cleaner that hooks onto your pool's water-return inlet and uses the flow from your filter pump to crawl across the floor and climb the walls right up to the waterline — no separate power, no scrubbing by hand. Water-powered all-wheel drive moves it around at up to 7 m/min with strong wall-climbing, while rotating dual dirt scrubbers loosen stubborn grime and a fine 6-gauge (0.15 mm) mesh filter traps dust, dirt, leaves and bugs into a removable ½-gallon debris basket you just lift out and empty.

Set-up is simple: connect it (a 1¼″ converter and a 21 ft tangle-free hose are included), run your filter pump, and let it work — a couple of hours to do a full pool. In a climate where pools run year-round and pick up dust and leaves constantly, an automatic cleaner takes a real chore off your hands.

Specifications

• Brand: Intex
• Model: 28005 (ZX300 Deluxe)
• Type: Pressure-side automatic pool cleaner — water-powered (no electricity)
• Cleans: Floor and walls up to the waterline
• Drive: Water-powered all-wheel drive, up to ~7 m/min
• Filtration: Dual scrubbers, 6-gauge (0.15 mm) mesh filter, ½-gal (≈1.9 L) removable debris basket
• Hose: 21 ft (≈6.5 m) tangle-free; 1¼″ converter included
• Requires: Intex filter pump with 1,600–3,500 GPH flow rate
• Pool fit: Intex above-ground up to 26′ round / 32′×16′ rectangle/oval; PVC-liner pools only
• Water temp: 25–45 °C (77–113 °F)
• Weight: ~16.4 lb (≈7.4 kg)

Note: The cleaner itself uses no electricity — no voltage concern. It relies on a running filter pump; that pump has its own power requirements.