Intex C1000 Krystal Clear Cartridge Filter Pump — 1,000 Gph (220–240v)

Intex C1000 Krystal Clear Cartridge Filter Pump — 1,000 gph (220–240V)

Keep an above-ground pool clean and clear with steady, efficient filtration. The Intex C1000 Krystal Clear circulates and filters roughly 1,000 gallons of water per hour (≈3,785 L/hr), drawing water through a replaceable Type "A" cartridge that traps dirt and debris, then returning it through inlet jets that keep the whole pool moving. It's built for easy living: a double-insulated motor for safe operation, an air-release valve to clear trapped air, and a built-in cartridge gauge that tells you at a glance when it's time to rinse or swap the filter. Setup is genuinely plug-and-play — connect the two included hoses to your pool's fittings and switch it on. CE and TÜV approved.

Specifications

• Model: C1000 (Krystal Clear cartridge filter pump)
• Flow rate: 1,000 gph (≈3,785 L/hr)
• Filter: Type "A" cartridge (included; replaceable)
• Power: 220–240V, double-insulated motor
• Features: air-release valve, built-in cartridge/clean gauge, water inlet jets
• Includes: pump, Type A cartridge, 2 connection hoses, clamps and wall fittings
• Suits: above-ground pools (32 mm fittings), up to roughly 6,000 gal

Power note: This is the 220–240V variant. On Curaçao's 127V supply it won't run properly and needs a step-up transformer sized to the pump's wattage — a filter pump draws considerably more than an airbed pump, so the transformer must be rated accordingly. Alternatively, source the 110–120V version (US model, e.g. 26637-series) for the local market. Whichever variant, always run it from a properly earthed, GFCI/RCD-protected outdoor outlet.

Care: Rinse the Type A cartridge regularly and replace it when the gauge indicates. In Curaçao's coastal, salt-air climate, keep the motor housing dry and sheltered from direct spray and rain to protect the electrics and slow corrosion.