Brown 3/16″ × 6″ Sds-plus Masonry Drill Bit — Carbide Tip

BROWN 3/16″ × 6″ SDS-Plus Masonry Drill Bit — Carbide Tip

A 3/16-inch (4.76 mm) SDS-Plus carbide-tipped masonry bit, 6 inches (≈152 mm) long, for hammer-drilling concrete, brick, block and stone with an SDS-Plus rotary hammer. The brazed tungsten-carbide tip and reinforced flutes stand up to percussive hammer action, drilling faster and lasting far longer than round-shank bits in tough masonry. The SDS-Plus shank locks positively into the hammer for slip-free power transfer.

Fits SDS-Plus rotary hammers only — not a standard drill chuck.

Diameter: 3/16″ (4.76 mm)
Overall length: 6″ (≈152 mm)
Shank: SDS-Plus
Tip: Tungsten-carbide, brazed
Drills: Concrete, brick, block, stone (hammer)
Brand / model: BROWN · BR31202
Safety: Wear eye protection and a dust mask; use in hammer mode; clear the hole of dust periodically; let the carbide tip cool — don't force a hot bit.