Brown 5/8″ × 12″ Carbide-tipped Masonry Drill Bit

BROWN 5/8″ × 12″ Carbide-Tipped Masonry Drill Bit

A 5/8-inch (16 mm) carbide-tipped masonry drill bit, 12 inches (≈305 mm) long for deep holes in concrete, brick, block and stone. The brazed tungsten-carbide tip withstands the heat and abrasion of masonry drilling and stays sharp far longer than plain steel, while the wide spiral flutes clear dust fast to keep the bit cutting cleanly. The extra length reaches through thick walls and deep anchoring holes.

Use with a rotary or hammer drill on the masonry/hammer setting.

Diameter: 5/8″ (16 mm)
Overall length: 12″ (≈305 mm)
Tip: Tungsten-carbide, brazed
Drills: Concrete, brick, block, stone
Brand / model: BROWN · BR1340
Safety: Wear eye protection and a dust mask; use hammer mode for masonry; clear the hole of dust periodically; let the carbide tip cool — don't force a hot bit.